Rockwell Automation 800F DeviceNet Pendant Stations - Manual (Page 27)

Chapter
3
Installation and Mounting
Chapter Objectives
This chapter describes how to install and mount a standard or custom
DeviceNet
™ Pendant Station. It contains the following sections:
DeviceNet
™ Guidelines
It is your responsibility to install and implement the DeviceNet
™
Network and supported devices according to the DeviceNet
™
guidelines.
Equipment Needed
There is no need to open the enclosure. The only tools required are for
installing a hanging cable.
Setting the Data Rate
This device contains Autobaud functionality, it will automatically
detect the network data rate and synchronize to it.
The data rate determines the maximum length of the DeviceNet
™
Cable.
Section Page
DeviceNet ™ Guidelines 3-1
Equipment Needed 3-1
Setting the DeviceNet ™ Node Address 3-2
DeviceNet ™ Pendant Dimensions 3-3
Hanging the Pendant Station 3-4
Recommended Strain-Relief Method 3-4