Rockwell Automation 800F DeviceNet Pendant Stations - Manual (Page 31)

Chapter
4
Operations
Chapter Objectives
This chapter contains the following sections:
Modes of Operation
The 800E/F DeviceNet
™ Pendant Station has 3 operating modes:
• Power-up/Reset Mode
• Run Mode
• Error Mode
Power-up/Reset Mode
During a power-up or reset, the 800E/F DeviceNet
™ Pendant Station:
1. Clears output (turns output off).
2. Performs power-up diagnostic tests.
3. If Autobaud is enabled, device synchronizes to the network.
4. Performs Duplicate MAC ID check.
If a duplicate node occurs, the output remains off and the device
goes to “Bus Off”. You must cycle power to clear the error.
Section Page
Modes of Operation 4-1
Resetting the Device 4-7
DeviceNet
™ Operations
4-8