Output byte, Error mode, Errors are critical and non-critical – Rockwell Automation 800F DeviceNet Pendant Stations User Manual
Page 37: Resetting the device, 7 resetting the device
Advertising
Operations
4–7
Publication 800-UM001A-EN-P – June 2004
OUTPUT BYTE
Error Mode
Errors are critical and non-critical.
See the troubleshooting chart in Chapter 5 for details on how to
recover from an error.
Resetting the Device
To reset the 800E/F DeviceNet
™ Pendant Station, you must cycle
power to the unit or disconnect and reconnect the DeviceNet
™
Cabling.
Bit Number
Function When = 1
Function When = 0
7
N/A
N/A
6
N/A
N/A
5
N/A
N/A
4
N/A
N/A
3
N/A
N/A
2
N/A
N/A
1
N/A
N/A
0
Output 1 Execute
Output 1 Idle
Error Type
Description
Critical (non-recoverable)
Failure of diagnostic tests during power-up/reset mode
Duplicate node address detected
Non-Critical (recoverable)
I/O connection timeout
Advertising
This manual is related to the following products: