Rockwell Automation 160 DEVICENET (DN1) MODULE FRN 1-2.XX - Manual (Page 12)

Publication 0160-5.5 - September 1997
Chapter
1
Product Overview
This chapter contains the following information:
• The physical layout of the module.
• Location of configuration switches.
• DeviceNet overview and components.
Module Description The Bulletin 160 SSC DeviceNet Communication Module is an
optional interface device designed to provide a direct, digital link
between DeviceNet devices and the Bulletin 160 SSC drive. The
module connects to the Bulletin 160 SSC through the expansion/key-
pad port on the front of the drive.
LEDs and DeviceNet Connection Figure 1.1
Module Front View
COMM - This bi-colored LED (red/green) provides status informa-
tion on DeviceNet communications ➀
DeviceNet Terminal Block Plug - The Communication Module
receives power and communications through this connector.
Module Installation Latch
Ready LED - GREEN when drive is powered up ➀
Fault LED - RED when drive is faulted
OFF when drive not faulted ➀
➀ See Chapter 4, Modes of Operation, and Chapter 7, Troubleshooting, for detailed operation.