Rockwell Automation 284G ArmorStart - User Manual - Manual (Page 279)

Bulletin 284G CIP Information C-29
The following common services are implemented for the Control
Supervisor Object
Table C.60 Control Supervisor Object Common Services:
Acknowledge Handler Object
— CLASS CODE 0x002b No class attributes are supported for the Acknowledge Handler Object.
A single instance (Instance 1) of the Acknowledge Handler Object is
supported. The following instance attributes are supported
Table C.61 Acknowledge Handler Instance Attributes:
The following common services are implemented for the Acknowledge
Handler Object
Table C.62 Acknowledge Handler Common Services:
Service
Code Implemented for Service
Name
Class Instance
0x0E No Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
Attribute
ID
Access
Rule
Name
Data
Type
Value
1 Get/Set Acknowledge Timer UINT milliseconds
2 Get Retry Limit USINT 1
3 Get COS Producing Connection Instance UINT 4
Service
Code
Implemented for
Service
Name
Class Instance
0x0E No Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single