Rockwell Automation 284G ArmorStart - User Manual - Manual (Page 48)

2-30 Installation and Wiring
Figure 2.26 Control Power Media System Overview
➏ Control Power Media Patchcords - PatchCord cable with integral female or male connector on each end
Example Part Number: 889N-F3AFNU-*F
➐ Control Power Tees - The Control Power tee (Part Number: 898N-33PB-N4KF) is used with a patchcord to connect to the ArmorStart Distributed Motor
Controller.
➑ Control Power Receptacles - Female receptacles are a panel mount connector with flying leads –
Part Number: 888N-D3AF1-*F
RE S ET
Bulletin 280/281
ArmorStart Bulletin 284
ArmorStart
RE S ET
Bulletin 280/281
ArmorStart
PLC
B u lletin 1492FB
Br a nch Circ u it
Protective Device
Enclo su re
Bulletin 1606
Power Su pply
1606-XLSDNET4
DeviceNet
Power Supply