Rockwell Automation W-Series Brushless Servo Motor - Manual

Publication 1398-IN520A-EN-P — May 2001
Installation Instructions
W-Series Brushless Servo Motor
(Catalog Number W-3016-N, W-4030-M, W-4030-P, W-4050-P, and W-4075-R)
These installation instructions describe how to install the W-Series
motors. Use this document if you are responsible for installing,
maintaining, or troubleshooting the Allen-Bradley
® W-Series motor
products. Please read all instructions before installing the motor.
For: See Page
Receiving and Maintenance Information 2
Motor Catalog Number Identification 2
Before You Install the Motor 3
Guidelines for Installation and Maintenance 4
Prolonging Washdown Motor Life 4
Using Couplings and Pulleys 5
Building and Installing Cables 6
Preventing Electrical Noise 7
Using Shaft Seals 8
Installing Your Motor 9
Mounting Dimensions 14
Connector Data 16
Motor Load Force Ratings 17
Radial Load and Axial Load Force Ratings 17
Shaft Seals 18
Using Shaft Seals 18
Removal and Installation of Shaft Seals 18
Shaft Seal Kits 20
Interconnect Cables 20