Rockwell Automation W-Series Brushless Servo Motor - Manual (Page 20)

20 W-Series Motor Installation Instructions
Publication 1398-IN520A-EN-P — May 2001
Shaft Seal Kits
Shaft seal kits available from the factory include:
Interconnect Cables
Factory manufactured cables are available in standard cable lengths. They
can provide environmental sealing and shield termination. The following
cables are for connecting the W-Series motors.
Catalog
Number Description Applicable
Motor
0041-5072 Teflon shaft seal kit for use above foodlines W-3000
0041-5073 Viton shaft seal for use below foodlines 1
0041-5074 Teflon shaft seal kit for use above foodlines W-4000
0041-5075 Viton shaft seal for use below foodlines 1
1 Lubricant is provided with Viton shaft seal kits.
Catalog Number Description Applicable Motor
2090-UXNPAHF-16-Sxx 1 H-3000 Power Cable 2 W-3000
2090-UXNPAHF-14-Sxx 1 H-4000 Power Cable 2 W-4000
2090-UXNFBHF-Sxx 1 H-Series Feedback Cable 2 W-3000 and W-4000
1 Cable length (xx) is specified in meters: 01, 03, 09, 15 or 30 (3.3, 9.8, 29.5, 49.2 or 98.5 ft)
2 H-Series Power and Feedback Cables have an MS connector on the motor end of the cable.
Remove the MS connector to use the cable with W-Series motors.