Rockwell Automation 1395 Digital Reference Adapter for RTP Applications - Manual (Page 65)

Publication 1395-RTP-5.2 - September 1997
Parameter Table 8-23
Parameter 596 – [A> Logic Mode]
Use: Maps Drive Logic State Machine Mode #
Program Terminal Units: None
Maximum Value: 0
Minimum Value: 0
Default Value: 0
READ ONLY PARAMETER
Description: This parameter is used as a monitoring device only. The
parameter is monitoring the Drive logic state machine mode number
and displays the value.
Parameter 597 – [A> Speed Ref Mode]
Use: Maps Drive Speed Ref State Machine Mode #
Program Terminal Units: None
Maximum Value: 0
Minimum Value: 0
Default Value: 0
READ ONLY PARAMETER
Description: This parameter is used as a monitoring device only. The
parameter is monitoring the Drive speed reference state machine
mode number and displays the value.
Parameter 598 – [A> Process Trim Mode]
Use: Maps Drive Process Trim State Machine Mode #
Program Terminal Units: None
Maximum Value: 0
Minimum Value: 0
Default Value: 0
READ ONLY PARAMETER
Description: This parameter is used as a monitoring device only. The
parameter is monitoring the Drive process trim state machine mode
number and displays the value.
Parameter 599 – [A> DR: Version]
Use: Maps Software Version #
Program Terminal Units: None
Maximum Value: 0
Minimum Value: 0
Default Value: 0
READ ONLY PARAMETER
Description: This parameter is used as a monitoring device only. The
parameter is displaying the current version of the Digital Reference
Adapter Board software.