Rockwell Automation 1395 Digital Reference Adapter for RTP Applications - Manual (Page 67)

Index
Publication 1395-RTP-5.2 - September 1997
A
Adapter Troubleshooting, 6-3
Analog Input/Output Set-up, 5-4
Analog Inputs, 1-2, 1-3, 2-5
Analog Outputs, 1-2, 1-3, 2-5
B
Board Features, 1-1
Board Function, 2-1
C
Configuration Links Set-up, 5-4
Configuration Parameters, 8-6
Connections to Drive, 4-3
Connections to Terminal Block 3 (TB-3) on Drive,
4-4, 4-5
Contamination, 7-1
Control Description, 3-1
D
Description of Equipment, 1-1
Digital Input/Output Set-up, 5-4
Digital Inputs, 1-3, 2-3
Digital Outputs, 2-4
Digital Reference Adapter Board Location –
Port A, 4-3
Digital Reference Fault Messages, 6-1
Digital Reference Input, 1-1, 1-3, 2-2
Discrete Inputs, 1-1
Discrete Outputs, 1-2, 1-3
Drive Logic States, 3-3
Drive Reference Control States, 3-3
E
ESD Precautions, 4-2
Example Start-Up Configuration (Linking), 5-2
F
Final Check Out, 7-2
Firmware Location, 2-6
H
Hard Faults, 6-1
Hardware Description, 2-1
I
Installation, 4-1
Introduction, 1-1
K
“Keep Good Maintenance Records”, 7-2
L
LED Indicators, 1-2
M
Mounting, 4-2