Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX - Manual (Page 25)

Chapter 3
Fault & Warning Queues
3–2
Press the key to access the Fault Entry Queue (Figure 3.2).
Figure 3.2
Fault Queue
CLR_FLT Drv_Res
Fault Queue:
TP
<
Power EEPROM FLT
>
02 - Fault Entry 2
03 - Fault Entry 3
04 - Fault Entry 4
Info
CLR_FLTQ Resolve
Fault
Code: 2014
Time: Thu PM
Dec 08, 1994
02:31:22:64
F1 F2 F4 F3
The latest four (4) fault entries will be displayed. If one of the four entries
caused the drive to trip, a TP designator will precede the fault text string.
To clear all faults while leaving a visual record of the faults on the display
press the
F1
soft designator. A verification request will
appear (Figure 3.3).
Figure 3.3
Clear Fault Verification Message
Clear Faults/Warnings
Are you sure (Y/N) ?
Press
F1
soft designator for YES and
F4
soft
designator for NO. Upon successful completion of the clear, the #1 entry in
the Queue will display CLEAR FAULTS to indicate Faults have been
cleared.
Clearing Faults