Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX - Manual (Page 45)

Chapter 6
Clock Data
6–4
This option allows you to load the current Date and Time into the reference
for record keeping purposes.
From the Clock Data Main Display, press the
F3
soft designator
key to load the clock into reference. The verification screen shown in Figure
6.5 will appear.
Figure 6.5
Load Reference Verification Display
Load Reference Stamp
Are you sure (Y/N) ?
To load the current clock reference press the
F1
soft designator
(YES). To return to the Set Clock Main Display without loading the reference,
press
F4
(NO).
From the Set Clock Main Display press the
F4
soft designator.
The verification screen in Figure 6.6 will appear.
Figure 6.6
Zero RT Accumulator Verification Display
Zero RT Accumulator
Are You Sure (Y/N) ?
To zero the RT Accumulator press the
F1
soft designator (YES).
To return to the Set Clock Main Display without zeroing the accumulator,
press
F4
soft designator (NO).
Loading the Reference
Zeroing the RT Accumulator