Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX - Manual (Page 37)

Chapter 5
Link Summary
5–4
Once you have entered all changes to Sink and Source links, press the
ESC
key to save these links.
The verification message in Figure 5.4 will appear.
Figure 5.4
Save Link Verification Message
Do you Wish to Save
Parameters/Links (Y/N) ?
To save all links, press the
F1
soft designator (YES)). To escape
the Link Verification and return to the Main Menu without saving your
changes press the
F4
soft designator (NO).
To clear all current links in the system, access a Link Summary Screen
(Figure 5.5).
Figure 5.5
Clearing Links
Link Summary:
SRC Sink
Parameter : 179
F Ć Startup
G Ć Limits
E Ć Pos Mtr Cur Lim
Parameter : 240
F Ć Velocity Torque
G Ć Torque Autotune
E Ć Rated Torque Cur
Clr_ All
The Clr_All function is located in the bottom right corner of the display and
is linked to the F4 soft designator key. Press the
F4
soft
designator and the verification message in Figure 5.6 will appear.
Saving Parameter Links
Clearing All Links in the System: