Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX - Manual (Page 34)

5
Chapter
5–1
Link Summary
This Main Menu option allows you to evaluate and change links in the
system. The Sink parameter will always be displayed on the left side of the
display and the Source parameter on the right. Each parameter will also
display a File, Group and Element text string.
There are four types of link options that you may use for inter-linking within
a system. These include:
1. Parameter to Parameter links
2. Parameter to Function Block Node links
3. Function Block Node to Parameter links
4. Function Block Node to Function Block Node links
To access Function Block links, you must use the Sel_Type option
(
F1
soft designator).
IMPORTANT: Only the first option (Parameter to Parameter) is currently
accessable with this release of the GPT. The SEL_TYPE option is non
functional at this time.
From the Main Menu, use the or key to place the
cursor on Option 2, Link Summary (Figure 5.1).
Figure 5.1
Main Menu
Main Menu:
1 - Parameter
2 - Link Summary
3 - Fault Queue
4 - Warning Queue
5 - EEPROM/BRAM
Help
ProcDsply
<
General
Accessing the Link Summary