Rockwell Automation 1608M MegaDySC User Manual, 800 - 2400 A - Manual (Page 26)

26 Rockwell Automation Publication 1608M-UM002A-EN-P - September 2013
Chapter 6 Display Screen
Step 4: Press the “Save” button to store the new date/time and format settings.
Note: Pressing “View Model Information” on the “Configuration” screen
provides model information about the MegaDySC system. It includes model
number, serial number, voltage and current ratings. Unit details are also present
including component serial numbers and firmware version numbers.
Home Screen The “HOME” screen of the display provides a snapshot view of the status of the
entire system (See
Figure 9 ). You can return to this screen from any other screen
by pressing the “Return to Home” button at the top of the screen.
Figure 9 - Home Screen
Table 4 - Home Screen
ATTENTION: TO AVOID DAMAGING THE TOUCH DISPLAY:
Do not subject the touch display to heavy impact.
Use your bare finger or plastic stylus to tap the touch display.
Do not use anything that might cut or damage the touch screen membrane.
The touch display panel is not waterproof.
Do not use alcohol, ammonia, toluene, or acetone cleaners on the display.
n
o
p
q
Item Description Function

Status Real-time system status: available runtime, output voltage, load current, and frequency.

System Operation Graphical view of operational state.

Last Event Details Information about the last voltage sag: event start time, event duration, and sag depth.

Main Menu
The menu buttons at the bottom of the screen navigate through:
Voltage Sags: Displays the “Voltage Sag Log” screen.
System Events: Displays the “System Event Log” screen.
System Status: Displays the “System Status” screen.
Configuration: Displays the “System Configuration” screen.