Rockwell Automation 1756-L72EROMS Armor GuardLogix Controller - Manual (Page 13)

Armor GuardLogix Controller 13
Rockwell Automation Publication 1756-IN060B-EN-P - November 2013
3. Type the Subnet Mask of the network.
The Gateway address, Primary and/or Secondary DNS address, and Domain Name
fields are optional.
4. Click OK.
The Request History panel shows the hardware addresses of all modules issuing
BOOTP requests.
5. Select the appropriate module and click Add to Relation List.
6. On the New Entry dialog box, type an IP Address, Hostname, and Description for the
module.
7. Click OK.
8. To permanently assign this configuration to the module, wait for the module to appear
in the Relation List panel and select it.