Rockwell Automation 1757-FFLD4 Foundation Fieldbus Linking Device Installation Instructions - Manual (Page 15)

Foundation Fieldbus Linking Device 15
Publication 1757-IN021E-EN-P - August 2009
3. Double-click the request.
A New Entry dialog box opens.
4. Type the IP address for the linking device.
5. Click OK.
The device is added to the Relation List at the bottom of the
BOOTP/DHCP Server window.
6. To permanently assign this configuration to the linking device, select
the device and click Disable BOOTP/DHCP.
When you cycle power to the linking device, it uses the configuration
you assigned and does not issue a DHCP request.