Rockwell Automation 1757-FFLD4 Foundation Fieldbus Linking Device Installation Instructions - Manual (Page 9)

Foundation Fieldbus Linking Device 9
Publication 1757-IN021E-EN-P - August 2009
3. While pressing the linking device down against the top of the rail,
snap the bottom of the linking device into position.
Mount on a Panel
Follow these steps to install your linking device on a panel.
1. Verify that the placement of the linking device allows for
50 mm (2 in.) of space on all sides for adequate ventilation.
Dimension Height
A 138 mm (5.43 in.)
B 69 mm (2.715 in.)
C 69 mm (2.715 in.) DIN latch closed, 76.1 mm (3 in.) DIN latch open
Middle of DIN
43482
Top Slot
DIN Rail
A
B
C