Rockwell Automation 1792D-CBXXX ArmorBlock MaXum I/O Cable Bases Series B - Manual

Publication 1792D-IN009B-EN-P - September 2000
Installation Instructions
ArmorBlock MaXum I/O Cable Bases
Series B
(Series 1792D-CBXXX)
The ArmorBlock
MaXum™ Ι/Ο Cable Bases mate with 4 or 8 point
modules depending on your installation requirements. No
modification is required. Modules are interchangeable whether flat or
round media cable bases are used. This interchangeability provides
plug and play block upgrade capability and easy field replacement.
The completely assembled ArmorBlock module and base requires no
enclosure.
These instructions describe the installation of each cable base. The
catalog numbers for the cable bases are:
• 1792D-CB12 for 12mm drop cable installation, see page 3
• 1792D-CBFM for flat media installation using KwikLink™
cabling, see page 7
(Please note: ArmorBlock MaXum modules and flat or round media
cables are ordered and shipped separately.)
CB12 CBFM
41528
41529