Rockwell Automation 1792D-CBXXX ArmorBlock MaXum I/O Cable Bases Series B - Manual (Page 12)

12 ArmorBlock MaXum I/O Cable Bases Series B
Publication 1792D-IN009B-EN-P - September 2000
2. Tighten the screws with a torque of 8 inch-pounds to secure
the module to the base.
ArmorBlock MaXum I/O modules are described in the following
publications:
• 1792D series of ArmorBlock MaXum Installation Instructions
• 1792-TD001B-EN-P - ArmorBlock Technical Data
Specifications
I/O Cable Bases - Cat. No. 1792D-CBXXX
General Specifications
For general specifications, see the ArmorBlock MaXum module’s documentation or the
Technical Data, 1792-TD001B-EN-P. The specifications listed in these publications are for
the assembled module and cable base.
30704-M