Rockwell Automation 1785-Lx0E Ethernet PLC-5 Programmable Controllers Installation Instructions - Manual (Page 13)

Publication 1785-IN063B-EN-P - January 2006
Ethernet PLC-5 Programmable Controllers 13
Install the System
Hardware This illustration shows a basic Ethernet PLC-5 programmable controller
system.
For more information, see the Enhanced and Ethernet PLC-5 Programmable
Controllers User Manual, publication 1785-UM012.
WARNING WARNING WARNING WARNING
If you connect or disconnect any communications cable
with power applied to this module or any device on the
network, an electrical arc can occur. This could cause an
explosion in hazardous location installations.
Be sure that power is removed or the area is nonhazardous
before proceeding.
WARNING WARNING WARNING WARNING
The local programming terminal port (circular mini-DIN
style programming terminal connection) is intended for
temporary use only and must not be connected or
disconnected unless the area is assured to be nonhazardous.
43910
Data Highway
Plus or Serial
Cable
Ethernet PLC-5
Controller Internal
Power Supply
PC with
Programming
Software