Rockwell Automation 1785-Lx0E Ethernet PLC-5 Programmable Controllers Installation Instructions - Manual (Page 14)

Publication 1785-IN063B-EN-P - January 2006
14 Ethernet PLC-5 Programmable Controllers
Prepare to Install the Controller
Installing the controller is one part of setting up the hardware in your system.
To properly install the controller, you must follow these procedures in the
order described in this section.
1. Install an I/O Chassis.
2. Configure the I/O Chassis.
3. Install the Power Supply.
4. Install the PLC-5 Programmable Controller.
5. Apply Power to the System.
6. Connect the Personal Computer to the PLC-5 Programmable
Controller.
Install an I/O Chassis
Install an I/O chassis according to the Universal I/O Chassis Installation
Instructions, publication 1771-IN075.