Rockwell Automation 1751 SynchLink 4-Port Splitter Block Installation Instructions - Manual (Page 3)

SynchLink 4-port Splitter Block 3
Publication 1751-IN002A-EN-P - March 2001
SynchLink Overview
We designed the SynchLink system to provide the synchronization and coordination
of drive and motion control applications that are based on ControlLogix

and
PowerFlex 700s

stations.
About the SynchLink 4-port Splitter Block
The 4-port splitter block converts electrical signals coming from the base block to
optical signals and retransmits them simultaneously through four output ports. The
splitter block is DIN rail-mounted and is housed in a two-piece plastic enclosure.
Figure 1 identifies the components of the splitter block.
Figure 1 - Components of the splitter block
Indicators
Channel 1 fiber port
Channel 2 fiber port
Module locking tab
Channel 4 fiber port
Channel 3 fiber port
Right-side and Left side (not shown)
backplane connectors
31201-M
Protective caps