Rockwell Automation 1751 SynchLink 4-Port Splitter Block Installation Instructions - Manual (Page 7)

SynchLink 4-port Splitter Block 7
Publication 1751-IN002A-EN-P - March 2001
6. Use DIN rail end anchors to secure the units together. (Allen-Bradley
catalog number 1492-EAH35)
7. Connect pre-terminated cables to the fiber optic connectors as shown.
ATTENTION
!
Make certain that the splitter block and base block are
secured together with DIN rail anchors. Failure to do so
may result in the loss of communications and/or cause
damage to the blocks.
Failure to use the DIN rail interlocks in hazardous
location installations could cause an explosion.
ATTENTION
!
Do not look directly into the fiber ports or fiber cables.
Light levels may cause damage to eyesight. The splitter
block is a Class 1 LED product.
31205-M
Connect channels 1 - 4 to the SynchLink
station receivers.