Rockwell Automation 1751 SynchLink 4-Port Splitter Block Installation Instructions - Manual (Page 5)

SynchLink 4-port Splitter Block 5
Publication 1751-IN002A-EN-P - March 2001
2. Hook the lip on the rear of the splitter block onto the top of the DIN rail,
and rotate the splitter block onto the rail.
3. Press the splitter block down onto the DIN rail until flush.
The locking tab should snap into position and lock the splitter block to the
DIN rail. If the tab does not snap into position, follow step 4. If the tab does
snap into position, proceed to step 5.
31203b-M