Rockwell Automation 1751 SynchLink 4-Port Splitter Block Installation Instructions User Manual
Page 6
Advertising
![background image](/manuals/579211/6/background.png)
6 SynchLink 4-port Splitter Block
Publication 1751-IN002A-EN-P - March 2001
4. Use a screwdriver or similar device to move the locking tab down while
pressing the splitter block flush onto the DIN rail. Release the locking tab to
lock the splitter block in place. If necessary, push up on the locking tab to
lock.
5. Once attached to the DIN rail, slide the splitter block to the left to mate with
the base block or another splitter block.
31203c-M
31204-M
Advertising