Rockwell Automation 1753-IF8XOF4 GuardPLC 1753-IF8XOF4 Analog I/O Module - Manual (Page 17)

GuardPLC 1753-IF8XOF4 Analog I/O Module 17
Publication 1753-IN013A-EN-P - September 2005
Analog Inputs
Number of Inputs 8 (not electrically isolated)
Input Signal Range, Nominal Voltage: 0 to +10V dc
Current: 0 to +20 mA (3)
Input Signal Range, Service Voltage: -0.1 to +11V dc
Current: -0.4 to +23 mA (3)
Shunt Resistor, External 500 Ω (for current input)
Impedance, Analog Input >2 M Ω
Analog Input Signal, Source
Impedance ≤ 500 Ω
Input Resolution 12 bits
Effective Resolution 9 bits @ 10V
Sensor Supply selectable 26V/8.2V
200 mA, short-circuit-proof
Accuracy 0.5%
Safety Accuracy 2%
Calibration Error Zero Point ±1%
Calibration Error Terminal Point ±0.4%
Channel Error ±0.5%
Temperature Error Zero Point ±0.5%/10 K
Temperature Error Terminal Point ±0.5%/10 K
Linearity Error ±0.5%
Long-term Drift ±0.5%
Analog Outputs
Number of Outputs 4 (not electrically isolated)
non-safety with common safety switch off
Output Signal Range 4…20 mA nominal
0…20 mA full range
Resolution of Software 12 bits
Impedance, Current Output 600 Ω max.
Calibration Error Zero Point ±1%
Calibration Error Terminal Point ±1%
Channel Error ±1%
Temperature Error Zero Point ±1%/10 K
Temperature Error Terminal Point ±1%/10 K
Linearity Error ±1%