Rockwell Automation 1792-IB4/B INSTL.INST ARMORBLOCK 4 INPUT - Manual (Page 18)

ArmorBlock 4 Input Module 18
Publication 1792-5.1 – October 1996
2. The configuration screen for your selected driver appears. You can:
•
set the node address
•
set the data rate
•
select the interface adapter serial port
•
set the interface adapter baud rate
3. After setting the parameters, click on the button. The
system will automatically go online, as shown at the bottom of the
screen.
Online will also appear in the Network area.