Rockwell Automation 1792-IB4/B INSTL.INST ARMORBLOCK 4 INPUT - Manual (Page 26)

ArmorBlock 4 Input Module 26
Publication 1792-5.1 – October 1996
The device configuration screen appears. Select the Reset Faulted I/O
parameter.
After selecting
the parameter, click on the
modify parameter button.
The configuration screen for the selected parameter appears.
2. Then click on the
OK button to apply.
3. You will be returned to
the configuration screen.
Click on ”Save to Device”
to apply the change.
1. Click on the desired
selection to reset.