Rockwell Automation 1792-IB4/B INSTL.INST ARMORBLOCK 4 INPUT - Manual (Page 8)

ArmorBlock 4 Input Module 8
Publication 1792-5.1 – October 1996
Connect the Wiring to the ArmorBlock Module
The block module uses quick disconnect, screw-on style connectors
for:
•
I/O input wiring
•
the DeviceNet connector
4 micro connectors for input signal wiring
DeviceNet mini connector
4 micro plugs – these
seal unused ports
4 micro plugs
0 1 2 3
4 micro plugs – these
seal unused ports
Micro plugs are included with your module. Use these plugs to cover
and seal unused ports.
Pinout diagrams for these connectors are shown below.
!
ATTENTION: All connectors must be securely
tightened to properly seal the connections against leaks
and maintain NEMA 4X and 6P requirements.