Specifications – Rockwell Automation 1792-IB4/B INSTL.INST ARMORBLOCK 4 INPUT User Manual
Page 34
Advertising
ArmorBlock 4 Input Module
34
Publication 1792-5.1 – October 1996
Specifications
4 Input Module – Cat. No. 1792-IB4
Input Specifications
Inputs per Block
4 sinking
On-state Voltage Range
10–30V dc
On-state Current
Maximum
Minimum
6.0mA @ 30V dc
2.0mA @ 10V dc
Off-state Voltage
Maximum
5V dc
Off-state Current
Minimum
1.5mA
Transition Voltage
5–10V dc
Transition Current
1.5–3.0mA
Input Impedance
Maximum
5K ohms
Input Signal Delay
Off to On
On to Off
0ms, 2ms, 4ms, 8ms, 16ms
0ms, 2ms, 4ms, 8ms, 16ms
Sensor Source
Voltage
Current
10–25V dc
50mA per point, 0.2A total per module
Indicators
Mod/Net Status – red/green
Input Fault – red
I/O Status – yellow (customer field side driven)
Specifications continued on next page.
Advertising