Rockwell Automation 1747-PBASE BASIC Development Software Programming Manual - Manual (Page 107)

Publication 1746-PM001A-US-P
Communicating with the Module 9-7
4. If your module has the 1747-M1 memory module installed, type 9FFFH for the
ending address. If your module has the 1747-M2 memory module installed,
type
FFFFH
for the ending address. Refer to the SLC 500 BASIC and BASIC-T
User Manual publication number 1746-UM004A-US-P, if you need to verify
whether you have the M1 or the M2 memory module. For the 1746-BAS-T,
the memory modules are an 8K EEPROM, 1771-DBMEM1 (similar to the
1747-M1), and a 32K EEPROM, 1771-DBMEM2 (similar to the 1747-M2).
5. Press
[Enter]
after typing in the ending address and the hex file upload
begins.
Downloading Hex Files
Downloading hex files is exactly like downloading program files. The addressing
information necessary when uploading hex files is embedded in the file and does
not need to be entered for a download. Make sure you have changed to Terminal
mode and established communications with the module as described earlier in this
chapter. Proceed as follows:
1. Select Download hex file from host to module using the path shown
below:
Path: Toplevel Menu
→ → → →
teRminal
→ → → →
File
→ → → →
dOwnload hex file from
host to module
Path: Main Menu
→ → → →
Other
→ → → →
teRminal
→ → → →
File
→ → → →
dOwnload hex file
from host to module
QuickStroke: none
You are prompted for a filename to download just as you would be if
downloading a program file.
2. Enter the path, filename, and file extension of the file to be downloaded, as
you would with a program file.
3. Press
[Enter]
after typing in the filename and the hex file download begins.
Besides the EEPROM memory options, the module also has two UVPROM
memory options as explained in the SLC 500 BASIC and BASIC-T User
Manual publication number 1746-UM004A-US-P, or the BASIC Module
Series B User Manual, publication number 1771-6.5.113. We recommend
using the utilities supplied with your PROM programmer when downloading
hex files to program UVPROMs.
IMPORTANT
You must enter the addresses exactly as indicated above to avoid a
checksum error when downloading this file to other EEPROMs
or UVPROMs.