Rockwell Automation 1747-PBASE BASIC Development Software Programming Manual - Manual (Page 61)

Publication 1746-PM001A-US-P
Editing a Program 4-13
5. Move the mouse cursor to the QuickStroke assignment field and click the left
mouse button. If you do not have a mouse, press [Tab] to move the cursor to
the QuickStroke assignment field and then press
[Space bar]
. The
EDIT
QUICKSTROKE
dialog box appears.
6. Press [Alt-B] , the QuickStroke for this macro. Legal QuickStroke key
assignments are described in Valid QuickStroke Key Assignments on
page 4-15.
7. Press
[Tab]
to move down to the Mode field. This is described in Editing
Keystroke Macros.
8. Press
[Enter]
to leave the Mode field unchanged and return to the keystroke
MACRO MANAGER
dialog box. There you see Company header added to the list
of keystroke macros with [Alt-B] , the QuickStroke that activates it, on the
right.
From this point on in the current editing session, whenever you press
[Alt-B]
,
the header is entered at the current cursor location.
Changing Recorded Keystrokes
Before leaving the keystroke MACRO MANAGER dialog box, you may want to make a
change to the recorded keystrokes. For example, you find that the company header
is always left-highlighted after the file-merge operation you defined with the
{Alt-B] QuickStroke. Since it is necessary to turn this block marking off before any
other block editing can be done, you can add the necessary keystrokes to the
macro.
1. From the keystroke MACRO MANAGER dialog box, highlight the Company
header keystroke macro, and press [F3] to edit it.
2. On the EDITING KEYSTROKE MACRO dialog box, select Edit keystrokes
with the mouse and press the left mouse button. If you do not have a mouse,
press
[Tab]
to move the cursor to highlight
Edit keystrokes
, and then press
the space bar or down arrow.
3. Move the cursor down the list of keystrokes to the line immediately preceding
where you wish to insert keystrokes.
4. Press
•
[INS-F2] to insert the keystroke to access the pull-down menus.
•
[INS-B] to insert the keystroke to access the block menu.
•
[INS-F] to insert the keystroke to turn the block marking off.
5. Press
[Enter]
, indicating that you are done editing keystrokes.
6. Press [Enter] , indicating that you are done editing the keystroke macro.
7. Press [Enter] , indicating that you are done with the keystroke MACRO
MANAGER .