Rockwell Automation 1747-PBASE BASIC Development Software Programming Manual - Manual (Page 36)

Publication 1746-PM001A-US-P
3-2 Configuring Your Software
Figure 3.1 Configuration Menu
Command Line Switches
The BASIC Development Software allows you to configure almost all of its options
via the Configuration menu. However, if you need to force a configuration setting
or change a setting temporarily, a command line switch can be used.
The following command line switches are available for use when starting the
BASIC Development Software. To use any of them type
PBASE
followed by the
desired switch or switches. (A space between
PBASE
and the / is optional; however,
if using more than one switch, each must be separated by a space.)
File Window Block cUrsor Search Text Layout Print Macro Config Other Exit
+------SETUP AND CONFIGURATION-----+
+|DOS=5.0 CPU=80386 |===========================?No-File?=+
||Video Card = VGA Color | |
||PBASE Path = C:\ABBASIC\BDS\ | |
||Expanded Memory N/A | |
||Serial # PBASE1 | |
||----------------------------------| |
||Edit settings... | |
||Display setup... | |
||Mouse / Key repeat setup... | |
||Filename extensions... | |
||Printer... | |
||sWapping / Expanded memory... | |
||Backups / Temp files / Autosave...| |
||Search and Replace defaults | |
||Terminal Selection Menu... | |
||saVe configuration and exit | |
|| | |
|+========Exit Setup<ESC>===========+ |
| |
| |
+-----------------------------------------------------------------------------+
L:3 C:1 1747-PBASE V x.xx [Text Edit] Ins 175k 06-12-91 1:15pm
1 Help 2 3 4 5 6 7 8 9 0