Rockwell Automation 1747-PBASE BASIC Development Software Programming Manual - Manual (Page 19)

Publication 1746-PM001A-US-P
Installing the Software 1-5
You may also choose a different drive. If the drive you choose has sufficient
memory, the installation procedure continues. You are prompted to approve or
alter the directory in which the software is to be installed:
Specify main directory in which to install files.
C:\ABBASIC
Press
[Enter]
to accept the directory name or type a new directory name and press
[Enter]
.
When you are finished loading the disks, you are reminded to modify your
config.sys and autoexec.bat files as described in the previous section.
Directory Structure
The default directory structure after installation is as follows:
•
\ABBASIC – main directory
•
\ABBASIC\BAS – sub-directory to store the user BASIC source programs.
This is your working directory.
•
\ABBASIC\BDS – sub-directory that stores the BASIC Development Software
files
•
\ABBASIC\BDS\HELP – sub-directory that stores the help files
Change to your working directory before invoking PBASE. Additional working
directories can be created anywhere on your hard disk.
You can change the sub-directory names after the installation process if the default
names are not acceptable. The HELP sub-directory must reside directly under the
BDS sub-directory or its equivalent. Do not rename the HELP sub-directory.
Rockwell Automation grants you a license to install and use this software on a
single personal computer, and to make one copy for backup purposes only. You are
not licensed to install this software on more than one personal computer or to
distribute it in any way. See the outside of the software package for licensing
information.
IMPORTANT
If you alter a directory or sub-directory name, be sure to change
the autoexec.bat file appropriately, as described in the beginning
of the installation procedure section.
IMPORTANT
If you alter a directory or sub-directory name, be sure to change
the autoexec.bat file appropriately, as described in the beginning
of the installation procedure section.