Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Server Installation Instructions - Manual

Publication 1757-IN951B-EN-P - March 2006
Installation Instructions
ProcessLogix R510.0 Server Installation
Instructions
Before you begin...
This publication guides you through the remaining processes required to initialize a
ProcessLogix Server. You are required to finalize the Server installation by completing the
instructions outlined in this document.
This document does not contain complete instructions covering the installation process, and
refers you to procedures contained in other documentation. For a successful installation, have
the following documents available:
• ControlNet PCI Communication Interface Card Installation Instructions,
publication 1784-IN003, shipped with the 1784-PCIC card.
• ProcessLogix R510.0 Installation and Upgrade Guide (I&UG),
publication 1757-IN510, shipped with the ProcessLogix R510.0 Software Kit.
These and other ProcessLogix documents can be found on The Automation Bookstore, at
http://www.literature.rockwellautomation.com. The following table lists items that you
MUST complete before attempting to use the ProcessLogix Server. If you have a redundant
Server pair, you must complete these items on both SERVERA and SERVERB.
Item Page
Installing the 1784-PCIC Card 3
Installing the Windows 2000 license and Warranty Transfer 3
Logging on to Windows 2000 4
Configuring the 1784-PCIC Card 4
Changing the PC Name 5
Changing the Network Settings 5
Creating an Emergency Repair Disk 7
Installing the RSLinx Activation File 7
Changing the ProcessLogix License 8
Configuring RSLinx Drivers for ControlNet Supervisory Network 10