Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Server Installation Instructions - Manual (Page 8)

8 ProcessLogix R510.0 Server Installation Instructions
Publication 1757-IN951B-EN-P - March 2006
7. Click Move to move the file to the hard drive.
8. Wait for a dialog box to indicate a successful move, and click OK.
9. Remove the Master Disk and store it in a safe place.
If you need to reformat your computer’s hard drive, you must first
move the activation file back to this Master Disk using this same
general procedure; otherwise, the file will be corrupted.
Changing the ProcessLogix License
The ProcessLogix Server is shipped with a temporary license. You must enter the system ID
and authorization numbers from the supplied license certificate to activate the license options
that you have ordered. To change the license:
1. Click Start ⇒ Programs ⇒ ProcessLogix Server ⇒ Start-Stop ProcessLogix
Server to call up the ProcessLogix Server dialog box.
To display the Full Mode version of the ProcessLogix Server dialog
box, click the icon on the left of the title bar and click Advanced ⇒
Full Mode.
A checkmark appears in front of the Full Mode selection to show that
it is active.
2. With Full Mode active, select the Database Only option.
3. Click Yes to confirm the action and wait for the Server to change its state.
TIP
TIP