Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Server Installation Instructions - Manual (Page 6)

6 ProcessLogix R510.0 Server Installation Instructions
Publication 1757-IN951B-EN-P - March 2006
The following Private Networking IP Address scheme can be utilized for the system to
operate:
Table 1 Private Networking IP Address scheme
Server Type Suggested Private Networking IP Address
Non-Redundant Server or Primary
Redundant Server NIC 1: 192.168.0.1
NIC 2: 192.168.1.1
NIC 3: 192.168.2.1
Backup Redundant Server NIC 1: 192.168.0.2
NIC 2: 192.168.1.2
NIC 3: 192.168.2.2
c. Enter the Subnet Mask 255.255.255.0.
d. Enter a default gateway if necessary.
IP Addresses are critical to the communication of the system. Rockwell
Automation suggests, when possible, to utilize a Private Network for
the control system, not connected to any other networks. This isolates
the control system from interference from any business
communication.
In some organizations it is important for these addresses to be
controlled by the IT organization. Consult your company’s practices
and IT organization for the appropriate IP address information. It will
be necessary to use valid IP information to integrate the ProcessLogix
Control system with the Business Network.
5. Click OK.
IMPORTANT