Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Server Installation Instructions - Manual (Page 11)

ProcessLogix R510.0 Server Installation Instructions 11
Publication 1757-IN951B-EN-P - March 2006
5. In the Configure 1784-PCIC window, enter the following:
a. Serial Number(hex): This value is read from the PCIC card and does not change.
b. Network Address(dec): Change the default of 99 to:
• Non-redundant Server 24
• Redundant Server A
24
• Redundant Server B 23
6. Click OK to start the PCIC driver.
7. In the Configure Drivers dialog box, you should see AB_PCIC-1 listed in the
Configured Drivers list with the status Running. If the AB_PCIC-1 driver status is not
Running, call Rockwell Automation Technical Support.
8. Click Close to close the Configure Drivers dialog box.
9. Close RSLinx.
10. Restart the PC.
Whenever the 1784-PCIC driver has been updated or the Network
Address is changed, the 1784-PCIC driver must be stopped and restarted
to complete the change. You must power down the PC.
ProcessLogix, ControlNet, and Allen-Bradley are trademarks of Rockwell Automation, Inc.
Windows 2000 is a registered trademark of the Microsoft Corporation.
Dell is a registered trademark of the Dell Computer Corporation.
RSLinx is a trademark of Rockwell Software, Inc.
IMPORTANT