Logging on to windows 2000, Configuring the 1784-pcic card – Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Server Installation Instructions User Manual
Page 4
4 ProcessLogix R510.0 Server Installation Instructions
Publication 1757-IN951B-EN-P - March 2006
8. In order to receive support from Dell, you must fill out their warranty transfer form.
The U.S. Ownership Transfer Form is only available online at:
The International Unit Location Transfer Form is only available online at:
Logging on to Windows 2000
1. Press <Ctrl> + <Alt> + <Delete> to initiate Windows 2000 logon.
2. Enter >ps_user< as the User name.
3. Enter >Proce$$510< as the default password.
If you purchased a new ProcessLogix R510.0 Server from Rockwell
Automation, the default passwords for ps_user and Administrator
were set to Proce$$510 for security reasons.
4. Press <Enter> or click OK to complete the logon.
You must repeat the above steps every time you restart the Server.
Configuring the 1784-PCIC Card
If you are using Ethernet for your Supervisory Network, skip to Changing the PC Name,
below.
Refer to 1784-PCIC Driver and Installation and 1784-PCIC Firmware Installation in Chapter
7 of the R510.0 I&UG for details.
TIP
TIP