Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Server Installation Instructions - Manual (Page 7)

ProcessLogix R510.0 Server Installation Instructions 7
Publication 1757-IN951B-EN-P - March 2006
Creating an Emergency Repair Disk
1. Insert a floppy disk into your PC.
2. Click Start
⇒
Programs
⇒
Accessories
⇒
System Tools
⇒
Backup.
3. Click Emergency Repair Disk.
The Emergency Repair Diskette window opens.
4. Check the Also back up the registry to the repair directory checkbox and click
OK.
5. When finished, click OK
.
Installing the RSLinx Activation File
Before attempting to move the activation file, you MUST exit all
ProcessLogix applications and stop all ProcessLogix services. Before
continuing, you must complete the procedure in Stopping ProcessLogix
Applications and Services in Chapter 8 of the R510.0 IU&G.
Your ProcessLogix Server is factory loaded with RSLinx Lite. To activate RSLinx OEM
(necessary for full functionality of ProcessLogix):
1. Insert the RSLinx Master Disk into your PC.
2. Click Start ⇒ Run.
3. Enter this path or Browse to:
>A: (or your floppy drive letter)\EVMOVE.EXE<
4. Click OK to launch the move.
5. Verify that you are Moving Activations From Drive A:
(or your floppy drive letter)
To Drive
C:
(or your hard drive letter)
.
6. Click OK to initiate the move.
ATTENTION
!