Rockwell Automation 1792-IB16 INSTL.INST ARMOR BLOCK 16 INPT - Manual (Page 19)

19 ArmorBlock 16 Input Module
Publication 1792-5.3 – October 1996
Add the Device to the Network
Action Response
At the network screen, click on the
“add device” button.
At the “add device to network”
screen, click on “discrete I/O” in
the device type box.
Then click on the desired ArmorBlock device.
Select the device node
address for this device.
Click on the OK button when you have selected your device.
Add more devices as necessary.
Important: The node address can only be set at the “Node Commissioning”
screen (from the Utilities pulldown menu). See page 3.