Rockwell Automation 1790D-XXXX DeviceNet Digital Base D-Shell Module CompactBlock LDX I/O Series B - Manual

Publication 1790-IN013A-EN-P - September 2006
Installation Instructions
DeviceNet Digital Base D-shell Block
CompactBlock LDX I/O
Catalog Numbers 1790D-16BV0, 1790D-8BV8V, 1790D-8BV8B,
1790D-0B16, 1790D-0V16, 1790D-0W6, Series B
Topic Page
Important User Information 2
Prevent Electrostatic Discharge 3
Environment and Enclosure 4
North American Hazardous Location Approval 5
Before You Begin 6
Install the Base Block 6
Set the Node Address 6
Mount the Base Block 7
Mount on a Panel 8
Mount on DIN Rail 9
Mount the Optional Expansion Block 9
Wire the D-shell Connectors 10
Connect the DeviceNet Cable 13
Interpret the LED Indicators 15
Cable Break Procedures 16
Specifications 17