Rockwell Automation 1790D-XXXX DeviceNet Digital Base D-Shell Module CompactBlock LDX I/O Series B - Manual (Page 7)

DeviceNet Digital Base D-shell Block CompactBlock LDX I/O 7
Publication 1790-IN013A-EN-P - September 2006
Node Address Setting
You can also set the node address through RSNetWorx for DeviceNet
software or a similar configuration tool.
When you use software configuration for the node address, set the
switches between 64 and 99.
Mount the Base Block
Mount the base block to a panel or DIN rail. We recommend that you
ground the panel or DIN rail before mounting the block.
IMPORTANT
The analog base module can accommodate a maximum of two
digital expansion modules.
In this
example, the
node address
setting is 11.
MSD LSD
NODE ADDRESS
MOD NET
STATUS
44202