Rockwell Automation 1790D-XXXX DeviceNet Digital Base D-Shell Module CompactBlock LDX I/O Series B - Manual (Page 18)

18 DeviceNet Digital Base D-shell Block CompactBlock LDX I/O
Publication 1790-IN013A-EN-P - September 2006
1790D-OW6 ac/dc Relay Output Block
Attribute Value
Relay Type Form A, normally open, single pole, single throw
Output Voltage Range (load
dependent) 5…24V dc @ 2.0 A resistive
30V ac @ 2.0 A resistive
Output Current Rating (at
rated power) 2.0 A @ 5…24V dc resistive
2.0 A @ 30V dc resistive
Load, Min 100 µA, 100 mV dc per point
On-state Voltage Drop, Max 0.5V @ 2.0 A, resistive load, 24V dc
Initial Contact Resistance 30 m
Ω
Expected Contact Life 300 kcycles resistive, 100 kcycles inductive
Off-state Leakage, Max 1.5 mA
Output Delay Time,
On to Off, Max 10 ms
Output Delay Time,
Off to On, Max 10 ms
Relay Coil Power
Dissipation 1.7 W @ 28.8V dc l
Isolation Voltage 50V dc (continuous), reinforced insulation type,
tested at 1250V ac for 60 s, I/O to system
1790D-8BV8V, 1790D-8BV8B dc Input/Output Combination Base Block
Attribute Value
Field Power Dissipation 3.22 W @ 28.8V dc
Isolation Voltage 50V dc (continuous), reinforced insulation type,
tested at 1250V ac for 60 s, I/O to system
Input
Inputs per Module 8 points non-isolated, sinking or sourcing
On-state Voltage 9.6V dc min, 24V dc nom, 28.8V dc max