Rockwell Automation Logix5000 Controllers Controller Information and Status Programming Manual - Manual (Page 42)

Chapter 3 Controller logging
Entry Information Logged
Firmware update from removable media • Time Stamp
• Entry Description: Firmware update from removable media
attempted
• UserName: Local
• Workstation: None
• FactoryTalk Login Id: None
• Extended Information: Old revision <major.<minor>, New
revision <major.<minor>, where the major and minor revision
numbers are each two digits.
Mode changed through Logix Designer • Mode change started Time Stamp
• Entry Description: Remote mode change
• UserName
• Workstation Name
• FactoryTalk Login Id
• Extended Information: Old mode <mode>, New mode <mode>
• Possible modes:
− Run
− Remote Run
− Test
− Program
− Remote Program
Mode changed through keyswitch • Time Stamp
• Entry Description: Keyswitch mode change
• UserName: Local
• Workstation Name: None
• FactoryTalk Login Id: None
• Extended Information: Old mode <mode>, New mode <mode>
• Possible modes:
− Run
− Remote Run
− Test
− Program
− Remote Program
Major fault • Time Stamp
• Entry Description: A major fault occurred
• UserName: None
• Workstation Name: None
• FactoryTalk Login Id: None
• Extended Information: Fault type <type number>, Fault code
<code number>
42 Rockwell Automation Publication 1756-PM015F-EN-P – October 2014