Rockwell Automation Logix5000 Controllers Controller Information and Status Programming Manual - Manual (Page 52)

Chapter 4 Change detection
To edit the Changes To Detect field, type a new value. To select the events to
monitor for changes from a list, click Configure to open the Configure Changes
to Detect dialog box.
For additional information on configuring the settings on the Security tab, refer to
the Logix5000 Security Programming Manual , publication 1756-PM016 or the
online help for the Logix Designer application.
Tip: To configure Change Detection programmatically use SSV, GSV or MSG instructions. See Controller change
detection on page 47 .
52 Rockwell Automation Publication 1756-PM015F-EN-P – October 2014