Configuration data file – Rockwell Automation 1769-OF2 Compact (Series B or Later) Analog Output Module User Manual
Page 15
Compact™ 1769-OF2 (Series B or Later) Analog Output Module 15
Publication 1769-IN049A-EN-P
Configuration Data File
The manipulation of the bits from this file is normally done with
programming software (e.g. RSLogix 500, RSNetworx for DeviceNet, etc.)
during initial configuration of the system. In that case, graphical screens are
provided by the programmer to simplify configuration. However, some
systems, like the 1769-ADN DeviceNet Adapter, also allow the bits to be
altered as part of the control program, using communication rungs. In that
case, it is necessary to understand the bit arrangement. The channel
configuration words, words 0 and 1, are described on page 16. Refer to the
Compact™ Analog I/O User Manual, publication number
1769-UM002A-EN-P for additional details.
Word/
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Word 0
See “Channel Configuration Words” on page 16.
Word 1
See “Channel Configuration Words” on page 16.
Word 2
S
Fault Value - Channel 0
(1)
(1) These functions are not supported by all controllers (e.g. MicroLogix 1500) using any configuration method.
Refer to your controller’s user manual for details.
Word 3
S
Program (Idle) Value - Channel 0
Word 4
S
Fault Value - Channel 1
Word 5
S
Program (Idle) Value - Channel 1