Rockwell Automation Logix5000 Controllers Security Programming Manual - Manual (Page 18)

Chapter 2 Configuring FactoryTalk Security with Logix Designer application
• Click the Advanced tab if the Security tab does not appear in the
Controller Properties dialog box.
In the Security box, select FactoryTalk Security.
6. Click OK. If prompted to confirm whether to confirm the controller
settings, click Yes.
Important: When you select a security authority for a project, you can only access the
project and any controller that contains it when you have been granted
access in FactoryTalk Security.
7. Save the project file.
18 Rockwell Automation Publication 1756-PM016G-EN-P - October 2014