Rockwell Automation Logix5000 Controllers Security Programming Manual - Manual (Page 22)

Chapter 2 Configuring FactoryTalk Security with Logix Designer application
5. Right-click the controller resource and then click Properties.
Example: If you want the security settings to be inherited by all controllers, right click
Networks and Devices, then click Security. From the Security Settings dialog
box, you can configure security settings that are inherited by all secured projects.
You can still configure unique permissions on a particular device, if needed. For
details see the FactoryTalk Help: Click the Start button, then click All Programs,
then click Rockwell Software, then click FactoryTalk Tools and then click
FactoryTalk Help.
6. In the Logical Name list, choose the Controller name. This name should
match the settings from the Controller Properties dialog box made during
the Securing a Logix Designer Application project file on page 14 section.
You can also type the controller name if the name does not appear in the
list.
22 Rockwell Automation Publication 1756-PM016G-EN-P - October 2014